Delete An "Undeletable" File

Delete An Undeletable File

• Open a Command Prompt window and leave it open.

• Close all open programs.
• Click Start, Run and enter TASKMGR.EXE
• Go to the Processes tab and End Process on Explorer.exe.
• Leave Task Manager open.
• Go back to the Command Prompt window and change to the directory the AVI (or other undeletable file) is located in.
• At the command prompt type DEL where is the file you wish to delete.
• Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart the GUI shell.
• Close Task Manager.

Or you can try this

• Open Notepad.exe

• Click File>Save As..>locate the folder where your undeletable file is
• Choose 'All files' from the file type box
• click once on the file you wanna delete so its name appears in the 'filename' box put a " at the start and end of the filename (the filename should have the extension of the undeletable file so it will overwrite it)
• click save, It should ask u to overwrite the existing file, choose yes and u can delete it as normal

Here's a manual way of doing it

1. Start

2. Run

3. Type: command

4. To move into a directory type: cd c:\*** (The stars stand for your folder)

5. If you cannot access the folder because it has spaces for example Program Files or Kazaa Lite folder you have to do the following. instead of typing in the full folder name only take the first 6 letters then put a ~ and then 1 without spaces. Example: cd c:\progra~1\kazaal~1

6. Once your in the folder the non-deletable file it in type in dir - a list will come up with everything inside.

7. Now to delete the file type in del ***.bmp, txt, jpg, avi, etc... And if the file name has spaces you would use the special 1st 6 letters followed by a ~ and a 1 rule. Example: if your file name was bad file.bmp you would type once in the specific folder thorugh command, del badfil~1.bmp and your file should be gone. Make sure to type in the correct extension.

Read More

How To Use Mobile Camera As A WebCam

How To Use Mobile Camera As A WebCam

• Step 1: Install Windows [EXE] (SmartCam.exe on your PC and Install)

• Step 2: Install Smartcam on your Mobile (Symbian S60 2nd Edition [SIS], S60 2nd Edition, JME [JAR], Windows Mobile [CAB], Android [APK]

• Step 3: Start up SmartCam on your PC and go to >>> File >>> Settings and check your connection and proceed >>> next step.

• Step 4: Start SmartCam on your phone and go to Options Connect and it will ask you for server name and you need to type your PC IP address or your system name.

If YOU don't know your IP address then, go to RUN type CMD type ipconfig

Read More

Burn .bin file Without A .cue file

To Burn A Bin File, You Will Need An Appropriate Cue File.

     You do exactly the same as for iso files, but when you click on “burn image,” you don’t browse to the bin itself, but instead to the cue file, and you open that one.

     When the writer starts to burn, it will automatically search for the bin file and start burning it. In fact, the cue file tells the burning program where it can find the bin file that is attached to it. It is VERY IMPORTANT that you use the right cue file when you burn a bin. 

i.e : Both cue and bin files that are attached to each other must be located in the same folder, and every bin file has it’s own cue file.

     Normally, when you download a bin file, you can download the appropriate cue file as well. If you do not have the cue file (or feel bold) you can make the cue file yourself, which is really easy to do:

a. Open notepad

b. Copy the folowing text into notepad:

FILE“nameofimage“BINARY
TRACK 01 MODE1/2352
INDEX 01 00:00:00

Where nameofimage.bin is the name of the bin file you want to burn.

c. The rest is easy: just save the notepad text with the name of the bin, but with the cue extension.

d. The file should be saved in the same folder as its appropriate bin file and should be something like myfile.cue

Or you can use Alcohol 120% to burn directly from the bin file

Read More

Create a Personal Screen Saver

Create a Personal Screen Saver

This isn't a tweak, but a great little feature! For a great way to put your digital photos to work, try creating a slide show presentation for use as a screen saver. Here's how:

1. Right-click an empty spot on your desktop and then click Properties.

2. Click the Screen Saver tab.

3. In the Screen saver list, click My Pictures Slideshow.

4. Click Settings to make any adjustments, such as how often the pictures should change, what size they should be, and whether you'll use transition effects between pictures, and then click OK.

Now your screen saver is a random display of the pictures taken from your My Pictures folder.

Read More

Use Windows Update Feature without register with Microsoft

Would you like to use the Windows Update feature without being forced to register with Microsoft? 

Here is the steps you can do:

• Open Run type Regedit.

• Go down to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion.

• Look for a value named RegDone. If it isn't there create a new value with that name.

• Right click the new value and choose Modify. Make the value 1.

• Close Regedit and you're done.

Read More

10 Fast and Free Security Enhancements

10 Fast and Free Security Enhancements 

Before you spend a time on security, there are many precautions you can take that will protect you against the most common threats.

1. Check Windows Update and Office Update regularly (http://office.microsoft.com/productupdates); have your Office CD ready. Windows Me, 2000, and XP users can configure automatic updates. Click on the Automatic Updates tab in the System control panel and choose the appropriate options.

2. Install a personal firewall. Both SyGate (www.sygate.com) and ZoneAlarm (www.zonelabs.com) offer free versions.


3. Install a free spyware blocker. Our Editors' Choice ("Spyware," April 22) was SpyBot Search & Destroy (http://security.kolla.de). SpyBot is also paranoid and ruthless in hunting out tracking cookies.

4. Block pop-up spam messages in Windows NT, 2000, or XP by disabling the Windows Messenger service (this is unrelated to the instant messaging program). 
Open Control Panel - Administrative Tools - Services and you'll see Messenger. Right-click and go to Properties. Set Start-up Type to Disabled and press the Stop button. Bye-bye, spam pop-ups! Any good firewall will also stop them.

5. Use strong passwords and change them periodically. Passwords should have at least seven characters; use letters and numbers and have at least one symbol. A decent example would be f8izKro@l. This will make it much harder for anyone to gain access to your accounts.

6. If you're using Outlook or Outlook Express, use the current version or one with the Outlook Security Update installed. The update and current versions patch numerous vulnerabilities.

7. Buy antivirus software and keep it up to date. If you're not willing to pay, try Grisoft AVG Free Edition (Grisoft Inc., www.grisoft.com). And doublecheck your AV with the free, online-only scanners available at www.pandasoftware.com/activescan and http://housecall.trendmicro.com.

8. If you have a wireless network, turn on the security features: Use MAC filtering, turn off SSID broadcast, and even use WEP with the biggest key you can get. For more, check out our wireless section or see the expanded coverage in Your Unwired World in our next issue.

9. Join a respectable e-mail security list, such as the one found at our own Security Supersite at http://security.ziffdavis.com, so that you learn about emerging threats quickly and can take proper precautions.

10. Be skeptical of things on the Internet. Don't assume that e-mail "From:" a particular person is actually from that person until you have further reason to believe it's that person. Don't assume that an attachment is what it says it is. Don't give out your password to anyone, even if that person claims to be from "support." 

Read More

How to Recover your memory card’s password

Recover your memory card’s password

Steps that are to be followed in order to recover your memory card’s password:

Step :1 Download and Install FExplorer.

Step :2 Insert card into your mobile phone but don’t access it
through phone.

Step:3 Run FExplorer and Open the path C:system . You will find a file named
mmcstore , move that file to other location of your phone, rename the file mmcstore.txt .

Step: 4 Open the file (mmcstore.txt) in your phone or Copy that file( mmcstore.txt ) to
your PC and open that file in notepad. 

You will find your password in that file.

Read More

Learn how to crack windows

Debug: Learn how to crack windows, programs ect manually

Debug is a program that comes with modern versions of DOS (I do not know when I started shipping out with DOS). Anyway, all Windows users should have it already.

It's a great tool for debuging programs, unassembling and cracking, and reading "hidden" memory areas like the boot sector, and much more.

The following was copied from an assembly tutorial who's author we cannot credit, because we have no idea who he is.

Get into DOS and type "debug", you will get a prompt like this:
-

now type "?", you should get the following response:
assemble A [address]
compare C range address
dump D [range]
enter E address [list]
fill F range list
go G [=address] [addresses]
hex H value1 value2
input I port
load L [address] [drive] [firstsector] [number]
move M range address
name N [pathname] [arglist]
output O port byte
proceed P [=address] [number]
quit Q
register R [register]
search S range list
trace T [=address] [value]
unassemble U [range]
write W [address] [drive] [firstsector] [number]
allocate expanded memory XA [#pages]
deallocate expanded memory XD [handle]
map expanded memory pages XM [Lpage] [Ppage] [handle]
display expanded memory status XS

Lets go through each of these commands:

Assemble:

-a
107A:0100

At this point you can start assembling some programs, just like using a assembler. However the debug assembler is very limited as you will probably notice. Lets try to enter a simple program:

-a
107A:0100 MOV AH,02
107A:0102 MOV DL,41
107A:0104 INT 21
107A:0106 INT 20
-g
A

Program terminated normally

That's the same program we did at the end of the previous chapter. Notice how you run the program you just entered with "g", and also notice how the set-up part is not there? That's because debug is just too limited to support that.
Another thing you can do with assemble is specify the address at which you want to start, by default this is 0100 since that's where all .COM files start.
Compare:

Compare takes 2 block of memory and displays them side by side, byte for byte. Lets do an example. Quite out of debug if you haven't already using "q". Now type "debug c:\command.com"

-c 0100 l 8 0200
10A3:0100 7A 06 10A3:0200

This command compared offset 0100 with 0200 for a length of 8 bytes. Debug responded with the location that was DIFFERENT. If 2 locations were the same, debug would just omit them, if all are the same debug would simply return to the prompt without any response.
Dump:

Dump will dump a specified memory segment. To test it, code that assembly program again:

C:\>debug
-a
107A:0100 MOV AH,02
107A:0102 MOV DL,41
107A:0104 INT 21
107A:0106 INT 20
-d 0100 l 8
107A:0100 B4 02 B2 41 CD 21 CD 20
...A.!.

The "B4 02 B2 41 CD 21 CD 20" is the program you just made in machine language.

B4 02 = MOV AH,02
B2 41 = MOV DL,41
CD 21 = INT 21
CD 20 = INT 20

The "...A.!." part is your program in ASCII. The "." represent non-printable characters. Notice the A in there.
Enter:

This is one of the hard commands. With it you can enter/change certain memory areas. Lets change our program so that it prints a B instead of an A.
-e 0103 <-- 0103="" at="" edit="" i="" program="" segment="">
107A:0103 41.42 <-- 41="" 42="" change="" i="" to="">
-g
B

Program terminated normally
-

Wasn't that amazing?Fill:

This command is fairly useless, but who knows....
It fills the specified amount of memory with the specified data. Lets for example clear out all memory from segment 0100 to 0108, which happens to be our program.
-f 0100 l 8 0 <-- 0100="" 0="" 8="" a="" bytes="" file="" for="" i="" length="" of="" offset="" with="">
-d 0100 l 8 <-- i="" it="" that="" verify="" worked="">
107A:0100 00 00 00 00 00 00 00 00 .......
Yep, it worked.
Go:

So far we used go (g) to start the program we just created. But Go can be used for much more. For example, lets say we want to execute a program at 107B:0100:
-r CS <-- 107b="" cs="" i="" point="" register="" set="" the="" to="">
CS 107A
:107B
-g =100

You can also set breakpoints.
-a <-- enter="" font="" have="" original="" our="" program="" so="" something="" we="">
107A:0100 MOV AH,02 to work with
107A:0102 MOV DL,41
107A:0104 INT 21
107A:0106 INT 20
-g 102 <-- 107a:0102="" a="" at="" break="" font="" point="" set="" up="">

At this point the program will stop, display all registers and the current instruction.
Hex:

This can be very useful. It subtracts and adds two hexadecimal values:
-h 2 1
0003 0001 <-- -="" 1="" 1h="1h</i" 2h="" 3h="" and="">

This is very useful for calculating a programs length, as you will see later.
Input:

This is one of the more advanced commands, and I decided not to talk about it too much for now. It will read a byte of data from any of your computers I/O ports (keyboard, mouse, printer, etc).

-i 3FD
60
-

Your data may be different.
In case you want to know, 3FD is Com port 1, also known as First Asynchronous Adapter.
Load:

This command has 2 formats. It can be used to load the filename specified with the name command (n), or it can load a specific sector.

-n c:\command.com
-l

This will load command.com into debug. When a valid program is loaded all registers will be set up and ready to execute the program.
The other method is a bit more complicated, but potential also more usefull. The syntax is

L

-l 100 2 10 20

This will load starting at offset 0100 from drive C (0 = A, 1 = B, 2 = C, etc), sector 10h for 20h sectors. This can be useful for recovering files you deleted.
Move:

Move takes a byte from the starting address and moves it to the destination address. This is very good to temporary move data into a free area, than manipulate it without having to worry about affecting the original program. It is especially useful if used in conjunction with the r command to which I will get later. Lets try an example:
-a <-- enter="" font="" have="" original="" our="" program="" so="" something="" we="">
107A:0100 MOV AH,02 to work with
107A:0102 MOV DL,41
107A:0104 INT 21
107A:0106 INT 20
-m 107A:0100 L 8 107B:0100 <-- 107a:0100="" 107b:0100="" 8="" bytes="" from="" i="" into="" more="" starting="">
-e 107B:0103 <-- 107b:0103="" edit="" i="">
107B:0103 41.42 <-- 42="" and="" change="" i="" it="">
-d 107A:0100 L 8 <-- i="" it="" make="" sure="" worked="">
107A:0100 B4 02 B2 41 CD 21 CD 20 ...A.!.
-d 107B:0100 L 8
107A:0100 B4 02 B2 42 CD 21 CD 20 ...B.!.
-m 107B:0100 L 8 107A:0100 <-- changes.="" font="" like="" original="" program="" restore="" since="" the="" we="">
Name:

This will set debug up with a filename to use for I/O commands. You have to include the file extension, and you may use addition commands:

-n c:\command.com

Output:

Exactly what you think it is. Output sends stuff to an I/O port. If you have an external modem with those cool lights on it, you can test this out. Find out what port your modem is on and use the corresponding hex number below:

Com 1 = 3F8 - 3FF (3DF for mine)
Com 2 = 2F8 - 2FF
Com 3 = ??? - ??? (if someone knows, please let me know)

Now turn on the DTA (Data Terminal Ready) bit by sending 01h to it:
-o XXX 1 <-- com="" font="" hex="" in="" is="" port="" the="" xxx="">

As soon as you hit enter, take a look at your modem, you should see a light light up. You can have even more fun with the output command. Say someone put one of those BIOS passwords on "your" computer. Usually you'd have to take out the battery to get rid of it, but not anymore:

MI/AWARD BIOS
-o 70 17
-o 71 17

QPHOENIX BIOS
-o 70 FF
-o 71 17

QGENERIC
-o 70 2E
-o 71 FF

These commands will clear the BIOS memory, thus disabling the password.
Proceed:

Proceeds in the execution of a program, usually used together withy Trace, which I will cover later. Like the go command, you can specify an address from which to start

using =address
-p 2

Debug will respond with the registers and the current command to be executed.
Quite:

This has got to be the most advanced feature of debug, it exits debug!

-q
Register:

This command can be used to display the current value of all registers, or to manually set them. This is very useful for writing files as you will see later on.

-r AX
AX: 011B
:5
-

Search:

Another very useful command. It is used to find the occurrence of a specific byte, or series of bytes in a segment. The data to search for can by either characters, or a hex value. Hex values are entered with a space or comma in between them, and characters are enclosed with quotes (single or double). You can also search for hex and characters with the same string:
-n c:\command.com <-- command.com="" data="" have="" i="" in="" load="" search="" so="" some="" to="" we="">
-l
-s 0 l 0 "MS-DOS" <-- block="" entire="" for="" i="" memory="" search="">
10A3:39E9 <-- 10a3:39e9="" font="" found="" in="" string="" the="">

NOTE: the search is case sensitive!
Trace:

This is a truly great feature of debug. It will trace through a program one instruction at a time, displaying the instruction and registers after each. Like the go command you can specify where to start executing from, and for how long.
-a <-- again="" font="" thing="" this="" yes="">
107A:0100 MOV AH,02
107A:0102 MOV DL,41
107A:0104 INT 21
107A:0106 INT 20
-t =0100 8

If you leave out the amount of instructions that you want to trace, you can use the proceed (p) to continue the execution as long as you want.
Unassemble:

Unassembles a block of code. Great for debugging (and cracking)
-u 100 L 8 <-- 100="" 8="" at="" bytes="" font="" offset="" starting="" unassembles="">
107A:0100 MOV AH,02 <-- debut="" i="" response="" s="">
107A:0102 MOV DL,41
107A:0104 INT 21
107A:0106 INT 20
Write:

This command works very similar to Load. It also has 2 ways it can operate: using name, and by specifying an exact location. Refer to back to Load for more information.

NOTE: The register CX must be set the file size in order to write!
NOTE: Write will not write .EXE or .HEX files.[SIZE=7][SIZE=14]

Read More

MAKE THE FOLDER INVISIBLE WITHOUT HIDING

MAKE THE FOLDER INVISIBLE WITHOUT HIDING

Make your folders invisible

Step 1:     Right Click on the desktop...Make a new folder

Step 2:     Now rename the folder with a space(You have to hold ALT key and type 0160).

Step 3:     Now you have a folder with out a name.

Step 4:     Right click on the folder>properties>customize... Click on change icon...

Step 5:     Scroll a bit, u should find some empty spaces, Click on any one of them...

Read More

How to Lock folder on windows using recycle bin

How to Lock folder on windows using recycle bin:

Open Run in your computer or press (ctrl +R) and type ‘regedit‘ command
You can list of keys and relates values.

Navigate through list until you find CLSID no of recycle bin in registry editor

For example:

CLSID no of recycle bin is >> {645FF040-5081-101B-9F08-00AA002F954E}
Now its time to lock folder using recycle bin so, lets say you want to lock folder named ‘Folder1?

OPen Notepad editor, inside type following text like

ren folder1 recycle.{645FF040-5081-101B-9F08-00AA002F954E}

and save that files as lock.bat

To unlock related Lock folder , you can create another batch file which will unlock folder.

Type below line in another notepad file and save that as ‘unlock.bat’

ren recycle.{645FF040-5081-101B-9F08-00AA002F954E}

So, when ever you want to lock folder execute created lock.bat and reverse execute unlock.bat for locking folder

Read More

How to increase internet in Windows by releasing reserved 20% of net speed

How to increase internet in Windows by releasing reserved 20% of net speed :

     Did you know Microsoft reserves 20% of your bandwidth for updates and so forth.

     Follow the following steps to get back what is rightfully yours

     This tweak is designed for broadband users on Windows XP Pro Edition or later. For Windows Home Edition, consult the forum, as gpedit.msc is not available for you. This tweak will only remove an internet reserve of 20%, although this is not active unless you are running QoS Aware programs.

1. Log on as "Administrator".
2. Run - gpedit.msc
3. Expand the "Local Computer Policy" branch
4. Then expand the "Administrative Templates" branch
5. Expand the "Network" branch
6. Highlight the "QoS Packet Scheduler" in left pane.
7. In the right window pane double-click the "Limit Reservable Bandwidth" setting
8. On the settings tab check the "Enabled" item
9. Change "Bandwidth limit %" to read 0(zero)
10. Then go to your Network connections Start=>Connect to=>Show All Connections and right-click on your connection. Then under the General or the Networking tab,(where it lists your protocols) make sure QoS packet scheduler is enabled.

Read More

TIPS TO RECOVER SCRATCHED CD'S

TIPS TO RECOVER SCRATCHED CD'S

Step 1: Spread a cloth on a flat surface and place the CD on it...

Step 2: Then, hold the disc with one hand, use the other to wipe the polish into the affected area with a soft cloth....

Step 3: Wait for it to dry and buff using short, brisk strokes along the scratch, not across it...

Step 4 : A cloth sold to wipe spectacles or camera lenses will work super...

Step 5: When you can no longer see the scratch,, wash the disc with water and let it dry before playing. Interesting isn't it? Try it right now...

• Fingermarks/prints cause 43% of disc problems! 
• General wear & tear causes 25% of disc problems! 
• Player-related issues cause 15% of disc problems! 
• Remaining Others

Read More

How To Hide Drives in Windows

How To Hide Drives in Windows:

1. Go to run .

2. Type "diskpart".

3. Type "list volume".

4. Now select the volume you want to hide by typing "select volume n"(n is the volume number against the drive you want to hide).

Example: select volume 2.

5. Type "revome letter x"(x is the drive name).eg: remove letter D.

Done, now check my computer .

     If you want to show the drive again then repeat step 1 to 4 then type "assign letter x".

     Don't try with drive C 

     If you have locked something with Folderlock or other software then after assigning the drive everything will be unlocked.

Read More

How can I reset the trial period of my software?

How can I reset the trial period of my software?

Uninstall the software and follow the steps

• After uninstalling software, Open RUN (Windows key + R) and type regedit and hit Enter.

• Now Registry Editor Window will appear and here navigate to HKEY_LOCAL_MACHINE \ SOFTWARE \ Your Software name from left pane of this window. If you find any Key name with your software name then just Delete that Key.

• Similarly navigate to HKEY_CURRENT_USER \ Software \ Your Software name and if you find any key with your software name then just Delete it and close the Registry Editor window.

• Again go to RUN and type %temp% and hit Enter.

• Now Delete all the things in that folder. Don’t worry these are the temporary files and not necessary for your operating system.

• Now go to C:\Users\your username here\AppData. Under AppData open all three folders "Local", "LocalLow" and "Roaming” and check. Under these three folders if you find any folder or anything with your Software's name, just delete it.

• Now Restart your PC and install the expired software and you can use it again for trial period. If you install the expired software without following the above steps then you don’t get trial period back.

Read More

Make your Windows Genuine using notepad!!!!

Make your Windows Genuine using notepad

Steps to be followed

1. Copy and Paste the following code in the Notepad.

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Mi
crosoft\Windows
NT\CurrentVersion\WPAEvents]
"OOBETimer"=hex:ff,d5,71,d6,8b
,6a,8d,6f,d5,33, 93,f d
"LastWPAEventLogged"=hex:d5,07
,05,00,06,00,07, 00,0 f,00,38,00,24,00,fd,02
[HKEY_LOCAL_MACHINE\SOFTWARE\Mi
crosoft\Windows NT\CurrentVersion]
"CurrentBuild"="1.511.1 () (Obsolete data -do not use)"
"InstallDate"=dword:427cdd 95
"ProductId"="69831-640-1780577-45389"
"DigitalProductId"=hex:a4,00,0
0,00,03,00,00,00 ,36,
39,38,33,31,2d,36,34,30,2d,\31,37,38,30,35,37,37,2d,34,35,
33,38,39,00,5a,00,00
,00,41,32,32,2d,30,30,30,\30,31,00,00,00,00,00,00,00,00,
0d,04,89,b2,15,1b,c4
,ee,62,4f,e6,64,6f,01,00,\00,00,00,00,27,ed,85,43,a2,20,
01,00,00,00,00,00,00
,00,00,00,00,00,00,00,00,\00,00,00,00,00,00,00,00,00,00,
00,31,34,35,30,34,00
,00,00,00,00,00,00,ce,0e,\00,00,12,42,15,a0,00,08,00,00,
87,01,00,00,00,00,00
,00,00,00,00,00,00,00,00,\00,00,00,00,00,00,00,00,00,00,
00,00,00,00,00,00,00 ,94,a2,b3,ac
"LicenseInfo"=hex:9e,bf,09,d0,
3a,76,a5,27,bb,f 2,da
,88,58,ce,58,e9,05,6b,0b,82,\c3,74,ab,42,0d,fb,ee,c3,ea,57,
d0,9d,67,a5,3d,6e,42
,0d,60,c0,1a,70,24,46,16,\0a,0a,ce,0d,b8,27,4a,46,53,f3, 17

2. Save the file with the .reg extension.

3. If you run the file means it will ask you the confirmation to add the value to your Registry.

4. Press Yes.

5. Reboot your System.

6. Start Downloading from Microsoft Site.

Read More

Hide Files

How To Hide A File Inside A Picture

     You must have played with invisible ink in your childhood. You used to prank your friend by writing some secret text using that and it is visible in some black or blue light.
In the digital world it is called steganography, which is used to hide some files or folders in some other files. Users can only access the front file like if you have embedded or hide a file inside a picture. Your user can only see the picture not the secret hidden file.

    There are many software and apps to hide a file inside a picture or you can use manual tricks also. Using these tools you can hide secret information’s in imade, pdf, mp3 and html.

     I will tell you about both manual method and by software method to hide a file inside a picture.

Manual Method To Hide A File Inside A Picture

Requirement

     You need to have either WinZip or WinRAR in your pc. If you don’t have you can download it from internet for free.

     Using this method you can hide or embed any type of file in inside an image, txt, exe, mp3, avi etc.

     Now lets get started with

Hide A File Inside A Picture

Step 1: Create a New folder (let name it hide)and put all the files that you want to hide with the image in which you want hide these files.


Step 2: Now select and compress all the file (except the image ) in .rar format. A compressed folder will got created in that folder. Let’s name it “Hidden.rar”.

Step 3: Now open your Command Prompt (cmd). You can open it from Start>>Run>>Cmd.

Now open the directory or folder that you have created in cmd. Like i created Hide at 

C:\Users\f\Desktop\hide, so i type these commands in cmd.

cd Desktop

cd hide

Now type a command in this format “copy /b Imagename.JPG + compressarchieve.rar ” like in my case it will be copy /b image.JPG + Hidden.rar and strike the Enter key.

Your files are now hidden in your image file. You can observe it by checking the size of your image file, it must be increased by some amount.

How To Access Hidden Files ?

     To access your hidden file, open your image file in win rar or change its extension to .rar

Automatic Software method to hide a file inside a picture

     There are many free software available on internet to hide a file inside a picture. But you must use the tested and trusted software or tools.

1. Hide In Picture: is a program that allows you to conceal files inside bitmap pictures, using a password. The pictures look like normal images, so people will not suspect there is hidden data in them.
2. Pict Encrypt (for MAC): Its a free software for mac user, using this you can encrypt a text to any image file(jpeg, jpg, png, gif, tiff). and can lock it with a password. It is some how different from the Hide in Picture as it actually not embed file in image but encrypt the text inside a image file.

     So now using tools you can hide any of your personal data inside an image, you can even lock it to protect it from some intelligent people. Its a cool way to send any secret message. Enjoy this cool amazing trick.

Read More